Cold curing acrylic resins for prosthetic bases, casting or injection technique universal use New Nanotechnology, high charge of micro-pearls, reduced contraction, low absorption of monomerAPPLICATIONS Total prostheses Partial prostheses Combined prostheses Rebasing Prostheses on implants Universal use Total prostheses Partial prostheses Combined prostheses Rebasing Prostheses on implants Universal use FEATURES Very good flowability 100% color stability new catalyst system High fitting accuracy and high strenght Excellents mechanical properties Mucous membrane friendly due to low amount of residual monomer Micropearls inside guarantee low contractions (Shrinkage) Less monomer and microperls means excellent polishing Very good flowability 100% color stability new catalyst system High fitting accuracy and high strenght Excellents mechanical properties Mucous membrane friendly due to low amount of residual monomer Micropearls inside guarantee low contractions (Shrinkage) Less monomer and microperls means excellent polishing REF/PACKAGING 30-100  Powder – 1000g 30-200  Liquid – 500ml 30-100  Powder – 1000g 30-200  Liquid – 500ml PROCESSING Mixing ratio Powder/Liquid - 10g : 4g-5g Working Time – 2 min Polymerization 45°C / 15 min Polymerization 45°C / 20 min Mixing ratio Powder/Liquid - 10g : 4g-5g Working Time – 2 min Polymerization 45°C / 15 min Polymerization 45°C / 20 min COLORS 00 Clean 01 Pink 02 Pink Venato 03 Pink M34 04 Pink Veined Translucent Klz 05 Pink -V Ivc 00 Clean 01 Pink 02 Pink Venato 03 Pink M34 04 Pink Veined Translucent Klz 05 Pink -V Ivc MECHANICAL ADD PROPERTIES ACCORDING ISO 1567 properties       request             microPress H-Tech ®   Bending strength in Mpa min 60 75 Bending module in Mpa min 1500 2550 Water absorption in μg/mm3 max 32 24 Solubility in μg/mm3 max 8 2.2 Residual monomer in %  max 4.5  1.6 properties       request             microPress H-Tech ®   Bending strength in Mpa min 60 75 Bending module in Mpa min 1500 2550 Water absorption in μg/mm3 max 32 24 Solubility in μg/mm3 max 8 2.2 Residual monomer in %  max 4.5  1.6 INSTRUCTIONS SAFETY DATA SHEET - POWDER SAFETY DATA SHEET - LIQUID