With the new Nanotechnology, high charge of micro-pearls, reduced contraction, low absorption of monomerAPPLICATIONS Temporary Crown & Bridge on implants and natural abutment with direct Intraoral or indirect extra oral frabrication. Temporary Crown & Bridge on implants and natural abutment with direct Intraoral or indirect extra oral frabrication. FEATURES Very good flowability 100% color stability new catalyst system High fitting accuracy and high strenght Excellents mechanical properties Mucous membrane friendly due to low amount of residual monomer Micropearls inside guarantee low contractions (Shrinkage) Less monomer and microperls means excellent polishing Chromatic and Fluorescent effect tooths Very good flowability 100% color stability new catalyst system High fitting accuracy and high strenght Excellents mechanical properties Mucous membrane friendly due to low amount of residual monomer Micropearls inside guarantee low contractions (Shrinkage) Less monomer and microperls means excellent polishing Chromatic and Fluorescent effect tooths REF/PACKAGING 50-100  Powder Bottle 100g 50-500 Powder Bottle 500g 50-600-10  Liquid bottle 100ml 50-600-50  Liquid bottle 500ml 50-100-MA2 Powder Bottle 100g 50-100-MA3 Powder Bottle 100g 50-100-MA3.5 Powder Bottle 100g 50-100-MAA4 Powder Bottle 100g 50-100  Powder Bottle 100g 50-500 Powder Bottle 500g 50-600-10  Liquid bottle 100ml 50-600-50  Liquid bottle 500ml 50-100-MA2 Powder Bottle 100g 50-100-MA3 Powder Bottle 100g 50-100-MA3.5 Powder Bottle 100g 50-100-MAA4 Powder Bottle 100g PROCESSING Mixing ratio Powder/Liquid - 10g : 5g Working Time – 2 min. Modelling phase – 5 min. Polymerization - 45° C • 20 min. Mixing ratio Powder/Liquid - 10g : 5g Working Time – 2 min. Modelling phase – 5 min. Polymerization - 45° C • 20 min. COLORS / DENTIN / MONOBODY / ENAMEL MECHANICAL ADD PROPERTIES ACCORDING ISO 1567 properties       request             microTemp HT Plus ®   Bending strength in Mpa min 65 76 Bending module in Mpa min 2000 2570 Impact strength in Kjm2 min 2 2.5 Water absorption in μg/mm3 max 32 22 Solubility in μg/mm3  max 1.6  1.8 Residual monomer in % max 2.2  1.7  properties       request             microTemp HT Plus ®   Bending strength in Mpa min 65 76 Bending module in Mpa min 2000 2570 Impact strength in Kjm2 min 2 2.5 Water absorption in μg/mm3 max 32 22 Solubility in μg/mm3  max 1.6  1.8 Residual monomer in % max 2.2  1.7  INSTRUCTIONS SAFETY DATA SHEET - POWDER SAFETY DATA SHEET - LIQUID