Heat curing acrylic resins for prosthetic bases, high physical and mechanical properties.APPLICATIONS Total prostheses Partial prostheses Combined prostheses Rebasing Prostheses on implants Total prostheses Partial prostheses Combined prostheses Rebasing Prostheses on implants FEATURES Very good flowability Easy handling High fitting accuracy and high strenght Excellents mechanical properties Mucous membrane friendly due to low amount of residual monomer Micropearls inside guarantee low shrinkage Compatible to any known individual shade, certified biocompatibility Very good flowability Easy handling High fitting accuracy and high strenght Excellents mechanical properties Mucous membrane friendly due to low amount of residual monomer Micropearls inside guarantee low shrinkage Compatible to any known individual shade, certified biocompatibility REF/PACKAGING 25-100  Powder – 1000g 25-200  Liquid – 500 ml 25-100  Powder – 1000g 25-200  Liquid – 500 ml PROCESSING Mixing ratio Powder/Liquid - 10g : 4g Working Time – 10 min Polymerization 95°C / 45 min Mixing ratio Powder/Liquid - 10g : 4g Working Time – 10 min Polymerization 95°C / 45 min COLORS 00 Clear 01 Pink 02 Pink Veined 03 Pink M34 00 Clear 01 Pink 02 Pink Veined 03 Pink M34 MECHANICAL ADD PROPERTIES ACCORDING ISO 1567 properties      request             microDON H-Tec ®   Bending strength in Mpa min 65 80 Bending module in Mpa min 2000 2700 Water absorption in μg/mm3 max 32 23 Solubility in μg/mm3 max 1.6 0.6 Residual monomer in %  max 2.2  0.8 properties      request             microDON H-Tec ®   Bending strength in Mpa min 65 80 Bending module in Mpa min 2000 2700 Water absorption in μg/mm3 max 32 23 Solubility in μg/mm3 max 1.6 0.6 Residual monomer in %  max 2.2  0.8 INSTRUCTIONS SAFETY DATA SHEET - POWDER SAFETY DATA SHEET - LIQUID