Fast curing impression tray material.APPLICATIONS Fabrication of individual impression trays Fabrication of individual base plates for Wax rims Tooth setup with wax Fabrication of individual impression trays Fabrication of individual base plates for Wax rims Tooth setup with wax FEATURES Easy handling Very short swelling phase Non-stick plastic phase Dimensionally stable Easy to finish Does not withdraw from the model Easy handling Very short swelling phase Non-stick plastic phase Dimensionally stable Easy to finish Does not withdraw from the model REF/PACKAGING 90-500  Powder 1000g 90-600  Powder 500ml 90-500  Powder 1000g 90-600  Powder 500ml PROCESSING Mixing ratio Powder/Liquid - 20g : 4.5g Mixing time – 15 sec. Swelling phase approx. - 45 sec. Plastic phase approx. - 4 min. Autopolym. after mixing approx. - 7-8min. Mixing ratio Powder/Liquid - 20g : 4.5g Mixing time – 15 sec. Swelling phase approx. - 45 sec. Plastic phase approx. - 4 min. Autopolym. after mixing approx. - 7-8min. COLORS White opaque Yellow opaque Blue opaque Pink opaque White opaque Yellow opaque Blue opaque Pink opaque MECHANICAL ADD PROPERTIES ACCORDING ISO 1567 properties       request           micro Nano Tray ®   Bending strength in Mpa - 61 Bending module in Mpa - 2160 Impact strength in Kjm2 - 285 Water absorption in μg/mm3 - 20 Solubility in μg/mm3 - 3.3 Residual monomer in % -  3.4 properties       request           micro Nano Tray ®   Bending strength in Mpa - 61 Bending module in Mpa - 2160 Impact strength in Kjm2 - 285 Water absorption in μg/mm3 - 20 Solubility in μg/mm3 - 3.3 Residual monomer in % -  3.4 INSTRUCTIONS SAFETY DATA SHEET - POWDER SAFETY DATA SHEET - LIQUID